Cold Shrink End Caps
Tier One TEC SERIES OF EPDM Cold Shrink End Caps is a rubber insulating tubular sleeve which is pre-expanded on a removable plastic cord. When applied, the cap will be bounced back automatically and seal tightly onto the cable end or other cylindrical object. It has excellent weather resistance, acid and alkali resistance.
【Features】
1. Made from EPDM rubber, which contains no chlorides or sulphurs.
2. Resists to water, alkalis, acids, abrasion and ozone
3. Moisture sealing and provides physical protection for cable ends.
Technical
|
Properties |
Typical Data |
Test method |
|
Hardness |
49 A |
ASTM D 2240 |
|
Tensile Strength |
9.8 MPa |
ASTM D412 |
|
Elongation at break |
720% |
ASTM D412 |
|
Tear Strength |
27 N/ mm |
ASTM D624C |
|
Dielectric Strength |
14.3kV/mm |
ASTM 149 |
|
UV Resistant |
UV irradiation for 2000 hours without aging |
ASTM G-53 |
Dimension
|
Part Number |
Inner Diameter (mm/inch) |
After Shrink Diameter(mm/inch) |
Application Range (mm/inch) |
Relaxed Length (mm/inch) |
|
TEC-25 |
25 (0.98"） |
10(0.40") |
11.6–20.9 (0.46–0.82) |
60 (2.36”) |
|
TEC-35 |
35（1.38”） |
14(0.55") |
15.9–30.1 (0.63–1.18) |
70(2.76”) |
|
TEC-55 |
55 (2.16") |
20(0.80") |
26.0–49.3 (1.02–1.94) |
82(3.23”) |
|
TEC-90 |
90 (3.54") |
40(1.60") |
45.5–84.3 (1.79–3.32) |
100(4.00”) |
